Feature:
. Sending intrusive signal to alarm panel to touch off alarm when door is open

. Built-in code matching makes it easy to match code with alarm panel

. Easily mounted by adhesive tape, just peel and stick to window, door, cupboard or toolboxes etc

. Easy to install

Directions:
 .Wireless Magnetic Contact is also called magnetic-controlled switch. It consists of wireless transmitter and magnetic panel. It is of high reliability and low rate of false alarm. The system is installed to your door or window to monitor the state of your door or window(open or closed).When the alarm panel is in armed state, magnetic contact will transmit the signals to the alarm host in wireless mode every timeyou open the door or window, and the alarm panel will trigger alarm whistle after receiving the signals

Specification:
. Working Frequency:315M/433/868MHz optional

. Working Voltage:DC12V

. Alarming Current: Less than 30 mA

. Static Current: Less than 20uA

. RF output power: 4~5mW

. Transmitting Distance:100~300m(In open area)

. Alarm Spacing: More than 1cm

. Alarm decibel: 86 dB

. Size:45×15×65mm

Package including:
 1 * Magnetic Sensor

 1 * Magnetic Stick

 1 * Battery

 1 * User manual